Pulley & sheave specialists · Mayapuri, Delhi
Elevator sheaves and pulleys, machined to your drawing.
We turn, groove and balance diverter sheaves, main & traction sheaves and lift pulleys in our Mayapuri workshop — made to your spec or sample, not off-the-shelf.
Custom machining · to drawing or sample · Delhi NCR
25+ yrs
Machining experience
±0.02 mm
Achievable tolerance
Ø 800 mm
Max turning diameter
To drawing
Custom-made, not off-the-shelf
What we make
Sheaves, pulleys and precision turning.
A focused range, machined in-house. Every part is turned, grooved and balanced to your drawing — with a real spec sheet, not just a photo.
Diverter Sheaves
Deflector / idler sheaves that route the rope with a true running face.
View specs
Main & Traction Sheaves
Drive sheaves with hardened, profile-ground grooves for traction and grip.
View specs
Lift Pulleys
Compensating, governor and deflector pulleys with sealed bearings.
View specs
Custom Lathe & Machining
General turning, boring and profiling — bring a drawing or a sample.
View specsNot a reseller — a machine shop
An elevator parts manufacturer, not a reseller — custom machining to your drawing.
Bring a drawing, a worn part or just a requirement. We machine it to size — the way a real manufacturer should.
Made to drawing
Send a PDF or DWG and we manufacture to your dimensions, tolerances and finish.
Reverse-engineered
No drawing? Send the worn sheave or a sample and we measure and reproduce it.
Prototype to batch
One-off first article, then repeat batches held to the same spec.
Real specifications
Every part comes with a real spec sheet.
Most suppliers give you a picture and a phone number. We publish the material, sizes, groove profile and bore for what we make — so your engineers can quote and design with confidence.
See all specifications| Material | Cast iron FG260 · EN8 on request |
|---|---|
| Outer diameter | 240 – 640 mm |
| Groove profile | Semicircular (U) with undercut |
| No. of grooves | 3 – 8 |
| Rope diameter | 8 · 10 · 13 mm |
| Bore | 30 – 80 mm, H7 |
| Hardness | 180 – 220 BHN |
| Balancing | Static |
| Finish | Machined + primer/enamel |
Diverter Sheaves — representative spec
Have a drawing or a sample? Let’s machine it.
Send your spec and we’ll come back with a quote and a realistic lead time — no obligation.